Model: custom cor-mp-01
Type of the system: Non-Thermal corona bench-top multi-parameter (mp) PLC conltrolled custom-build system to evaluate decomposition of toxic compounds and sterilization actions in a contaminated air or exhaust flows.
System Overview:   • Input power: versions 230 V one phase (2 kw) and 380 Volts, 3-phase 50-60 Hz for 4 /8 kw,
• Overall dimensions: for 2 kw:  footprint: 45 cm x, 55 cm, 55cm high, for  4 and 8 kw: 55 x 60cm  and 95 cm high,
 • Food/medical grade stainless steel enclosure and lamp modules,
• Weight:  ca. 40 kg (2 kw) and 50 kg, (4 and 8 kw, ). 
• a cylindrical chamber from 1 to 2 m long, diameter 6 cm (2.5") to treat hazardous gases.
• Efficient energy transfer (coupling) from Pulse Forming Network to a reactor,
• Accurate controls of corona basic parameters:
    pulse parameters of PFN - voltage and current with the included PC DSO scope,
    temperature of treated gas,
• pre-stored sets of recommended corona parameters by an on-board CPU,
• Interactive display to re-program and to store pulse parameters,
• Off-the-shelf electrical components for replacements,
• Low temperature operation including for heated gases,
• Relatively low capital and operating costs.



Pulse parameters:

• Pulse energy:  can be set from 1J to 10J by changing PFN capacitors and by setting the charging voltage
  from 10 kV  to 30 kV,
• Pulse width:  from 200 ns to 10 µsec, depending on gas parameters, and on the pulse energy  dissipation,
• Pulse rate: can be set from 0.1 Hz to 100 Hz,
• Run Timer: 1 pulse, or from 1 sec to a few hours, with the count-down clock.


Front panel:

• LCD (Siemens 5.5") panel with soft-keys to change a pulse rate, a pulse energy and a run time. 
• LED indicators for interlock positions,
• System On-Off switch,
• Emergency stop button.



Options:

 • Gas cooler to treat high-temperature (150 to 500 ̊C) gases ,
• Catalyst to increase oxidation processes,
• Extension coaxial reatcors to prolong treatment time at the same gas flow,
• Flat reactors with the same control system for sterilization of packaging,  or of thin flat or cylindrical products (caps),
• Instrumentation to measure plasma parameters (electron density, gas composition, UV light spectra)
 • Custom reactord from desk-top to medium sized pilot systems,

Safety standards:

• CE  by SBS GmbH,Fully interlocked, 
• no EMC leaks which will disturb stadnard electronics or PC placed nearby.
 BACK TO TOP SteriBeam Systems GmbH  
Tannenweg 11 A, D-77694 Kehl/am Rhein, Germany.
Tel. +49 (0) 7851 899 330  FAX +49 (0) 7851 899 331
URL: www.steribeam.com    e-mail: info@steribeam.com